FlexaBoot.
FlexaBoot is an inexpensive acoustically tested sound boot for return air grilles.
FLEXABOOT BENEFITS:
Reduces Room-to-Room Crosstalk and Transfer Noise - Increases Room Privacy
Flexible Design Allows Installation Above Ceilings Without Conflict
Inexpensive and Easy to Install
Less Labor, Shipping, and Handling Costs
*Return Grille not included.
FlexaBoot replaces expensive shop fabricated sheet metal boots often shown on plans.
FLEXABOOT FEATURES:
Complete Kit Ready to Install – Available in 16" and 10" Diameters
No Fibrous Materials in Airstream
Five Times Lighter Than Sheet Metal Return Air Boot
U.L. Classified Components - Made in USA
*Return Grille not included.
FLEXABOOT FORMS:
CAD DRAWINGS.
INSTALLATION.
SUBMITTAL.
FAQs
-
FlexaBoot provides multiple advantages:
o FlexaBoots cost approximately 50% less compared to sheet metal boots
o Flexibility above ceiling – easy to offset over, under, and around obstacles
o FlexaBoots are acoustically designed and tested - sheet metal boots are not
o No fibrous materials in the air stream
o FlexaBoots weigh 9 lbs each - sheet metal boots weigh approximately 47 lbs each
o All components are U.L classified and made in USA
-
Yes, click here to request “Test Data” for acoustical testing reports.
-
Yes, thousands of FlexaBoots have been accepted and installed through the V.E. process, saving thousands of dollars on numerous projects.
-
The most economical choice is 24x24 perforated face grille with either a 16” round neck or 10” round neck. Square-to-round adaptors allow FlexaBoot to be used with almost all return grilles with 22x22 and 22x12 necks sizes.
-
FlexaBoots are available in 10” and 16” round. The 10” round is typically used with 24x12 face return grilles. The 16” round is typically used with 24x24 face return grilles.
-
Both 16” and 10” FlexaBoots ship two per carton.
-
One hanger per FlexaBoot. Sheet metal boots typically require at least three hangers per boot.